Alpha Ecoguard Type W Bedienungsanleitung

Part No: ECOGRDGR Version 1103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-0114www.alpha-tools.comAlpha® Ecoguard Type GDust Collecti

10Choose proper Spacer to Keep X and Y as below:1<X<51<YReference: Example of the combination of Spacer and Base FlangeCUP Type PartsALPHA®

11GRINDING APPLICATIONS SURFACE GRINDING Securely connect the Flexible Connector Hose to the Dust Collection Cover. Turn Grinder and Vacuum on to sta

12Switch the position of the Sub Cover and Half Cover.Tighten screws.ATTACHING THE DUST COLLECTORSecurely connect Flexible Connector Hose to the duct

13ALPHA® ECOGUARD TYPE G SCHEMATICALPHA® / MAKITA®CONNECTOR, SPACERSAND FLANGE / LOCK NUT*Original indicates Lock Nut included with tool.

14*Original indicates Lock Nut included with Tool. # 11-a,b,c,d - Choose spacer according to Cup Type. (See chart on page 10)ECOGUARD TYPE G OTHER

15ALPHA® ECOGUARD TYPE G PARTS LISTDRAWING NO. PART NO. DESCRIPTION QUANTITY1 500032 Main Cover 12 500033 Sub Cover 13 500034 Half Cover 14 500005 Rub

Copyright © 2010 Alpha Professional Tools. All rights reserved. 103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-0114www.alpha-tools.c

2TABLE OF CONTENTSIntroduction ...3 About the Symbols ...

3INTRODUCTIONThank you for purchasing the Alpha® Ecoguard Type G Dust Collection Cover. The Ecoguard Type G must be used with a vacuum, or other dus

4Stainless Steel Hose BandRubber Hose AdapterECOGUARD TYPE G OVERVIEW ACCESSORIES Ecoguard Dust Collection Cover w/ Connector (Part# 500028) ... 1

5INSTALLING THE DUST COLLECTION COVER WARNING!Be sure to turn off the high-speed angle grinder and remove the plug from the electrical outlet before

6If the different Connector is needed, exchange the connector as per the following instructions.Loosen the Screws.Take the front of the Connector Ass

7Assembly.Tighten Flat Head Screws with Hex Wrench. (DO NOT forget to insert Taper Washers)Hex-WrenchFlat Head ScrewTighten the Screws

8Connector Assembly CAUTION!The Dust Collection Cover is solely designed for use with a grinding cup wheel. Do not use with any other type of blade,

9Set the proper Spacer into the spindle.Set the Base or Inner Flange on the Spacer.Set the Grinding Cup Wheel on the Base or Inner Flange.Set the Lock