Alpha 1000A Installationshandbuch

AlphaServer 1000/1000ACPU Upgrade GuidePart Number: EK-AL530-UP. A01September 1996Digital Equipment CorporationMaynard, Massachusetts

AlphaServer 1000/1000A CPU Upgrade Guide 2–12 Updating the Operating System Minimum Operating System RevisionsBefore you begin the CPU upgrade, make

Updating the Operating System2–2 AlphaServer 1000/1000A CPU Upgrade Guide Installing New Windows NT System Files Step 1: Boot the Windows NT oper

AlphaServer 1000/1000A CPU Upgrade Guide 3–13 Installing the CPU and Updating theConsole FirmwareThis chapter explains how to update the ARC and SRM

CPU Module Installation and Firmware Update3–2 AlphaServer 1000/1000A CPU Upgrade Guide CautionUse the antistatic wrist strap provided with the upgr

CPU Module Installation and Firmware UpdateAlphaServer 1000/1000A CPU Upgrade Guide 3–3C. Set the J4 jumper (or J1 jumper depending on the CPU) on t

CPU Module Installation and Firmware Update3–4 AlphaServer 1000/1000A CPU Upgrade GuideD. Install the performance-enhanced CPU module as follows, r

CPU Module Installation and Firmware UpdateAlphaServer 1000/1000A CPU Upgrade Guide 3–5Verify Compares loadable and hardware images.? or Help Scrolls

CPU Module Installation and Firmware Update3–6 AlphaServer 1000/1000A CPU Upgrade Guide_________________________Caution____________________________T

AlphaServer 1000/1000A CPU Upgrade Guide 4–14 Updating Configuration DataThis chapter explains how to update the configuration information in the EIS

September 1996Digital Equipment Corporation makes no representations that the use of its products in the manner described in thispublication will not

Updating Configuration Data4–2 AlphaServer 1000/1000A CPU Upgrade Guide Step 1: Start the ECUInsert the ECU diskette in the drive. If the system p

Updating Configuration DataAlphaServer 1000/1000A CPU Upgrade Guide 4–3_________________________ Caution ___________________________Using a version o

Updating Configuration Data4–4 AlphaServer 1000/1000A CPU Upgrade Guide Step 2: Run the utility to set controller parameters.A. On the AlphaServe

Updating Configuration DataAlphaServer 1000/1000A CPU Upgrade Guide 4–5E. After you have set the controller parameters, press the Esc key. At the S

Updating Configuration Data4–6 AlphaServer 1000/1000A CPU Upgrade Guide B. Enter a:swxcrmgr from the floppy (or cd:\utility\swxcrmgr from the CD-R

Updating Configuration DataAlphaServer 1000/1000A CPU Upgrade Guide 4–7 Verifying Custom Settings/Variables For Windows NT:Using the cursor control

Updating Configuration Data4–8 AlphaServer 1000/1000A CPU Upgrade GuideAttach the label to the rear of the system.To return the old CPU to Digital,

AlphaServer 1000/1000A CPU Upgrade Guide 5–15 Downgrading Your SystemThis chapter explains how to downgrade your system from an 5/xxx system to a 4/x

Downgrading Your System5–2 AlphaServer 1000/1000A CPU Upgrade GuideUPD> updConfirm update on:SRMARC[Y/(N)]yWARNING: updates may take several minut

iiiTable of ContentsPREFACE v1 UPGRADE OVERVIEW 1–1 Upgrade Kit Contents 1–1 Prerequisites 1–2 StorageWorks RAID Array Subsystem Firmware 1–2 Summary

iv Step 1: Shut Down the Operating System. 3–1 Step 2: Power down the system. 3–1 Step 3: Remove the Existing CPU module and install thePerformance-E

vPrefaceIntroductionThis document explains how to upgrade AlphaServer 1000/1000A systems withperformance-enhanced CPU modules.AudienceThis document is

viOpenVMS AXP Version 6.2 Upgrade andInstallation ManualAA-PV6XC-TEStorageWorks RAID Array 200 SubsystemsController Installation and StandaloneConfigu

AlphaServer 1000/1000A CPU Upgrade Guide 1–11 Upgrade Overview Upgrade Kit ContentsThe following items are required to perform an upgrade. They are

Upgrade Overview1–2 AlphaServer 1000/1000A CPU Upgrade GuideUpgrade Kit for AlphaServer 1000A Systems• • Upgrade CPU module• Product Conversion La

Upgrade OverviewAlphaServer 1000/1000A CPU Upgrade Guide 1–3 Summary of Upgrade ProcessThe upgrade process is briefly outlined below. Follow the s